Uses of Class
tuwien.auto.calimero.Priority

Packages that use Priority

tuwien.auto.calimero	Base package of the Calimero library.
tuwien.auto.calimero.cemi	Offers an interface to the common External Message Interface, cEMI for short.
tuwien.auto.calimero.datapoint	Contains a representation for KNX datapoints, for state based datapoints as well as for command based datapoints.
tuwien.auto.calimero.link	Link interface to access a KNX network.
tuwien.auto.calimero.link.medium	Contains setting types storing necessary KNX device and medium information, and KNX message frame types for different KNX communication media.
tuwien.auto.calimero.mgmt	Contains KNX property and management services.
tuwien.auto.calimero.process	Provides high level process communication.

Uses of Priority in tuwien.auto.calimero

Fields in tuwien.auto.calimero declared as Priority

static Priority	Priority.LOW Low priority, used for long frames.
static Priority	Priority.NORMAL Normal priority, the default for short frames.
static Priority	Priority.SYSTEM System priority, reserved for high priority management and system configuration.
static Priority	Priority.URGENT Urgent priority, for urgent frames.

Methods in tuwien.auto.calimero that return Priority

static Priority	Priority.get(int value) Returns the priority of the supplied priority value code.
static Priority	Priority.get(java.lang.String value) Returns the priority of the supplied priority value representation.

Uses of Priority in tuwien.auto.calimero.cemi

Methods in tuwien.auto.calimero.cemi that return Priority

Priority

CEMILData.getPriority() Returns the message priority.

Methods in tuwien.auto.calimero.cemi with parameters of type Priority

void	CEMILDataEx.setPriority(Priority p)

Constructors in tuwien.auto.calimero.cemi with parameters of type Priority

CEMILData(int msgCode, IndividualAddress src, KNXAddress dst, byte[] tpdu, Priority p)
Creates a L-Data message with most control information set to default values.

CEMILData(int msgCode, IndividualAddress src, KNXAddress dst, byte[] tpdu, Priority p, boolean confirm)
Creates a L-Data message, mainly for confirmation.

CEMILData(int msgCode, IndividualAddress src, KNXAddress dst, byte[] tpdu, Priority p, boolean repeat, boolean broadcast, boolean ack, int hopCount)
Creates a L-Data message with full customization for control information.

CEMILData(int msgCode, IndividualAddress src, KNXAddress dst, byte[] tpdu, Priority p, boolean repeat, int hopCount)
Creates a L-Data message, mainly for TP1 media.

CEMILDataEx(int msgCode, IndividualAddress src, KNXAddress dst, byte[] tpdu, Priority p)
Creates a L-Data message with most control information set to default values.

CEMILDataEx(int msgCode, IndividualAddress src, KNXAddress dst, byte[] tpdu, Priority p, boolean confirm)
Creates a L-Data message, mainly for confirmation.

CEMILDataEx(int msgCode, IndividualAddress src, KNXAddress dst, byte[] tpdu, Priority p, boolean repeat, boolean broadcast, boolean ack, int hopCount)
Creates a L-Data message with full customization for control information.

CEMILDataEx(int msgCode, IndividualAddress src, KNXAddress dst, byte[] tpdu, Priority p, boolean repeat, int hopCount)
Creates a L-Data message, mainly for TP1 media.

Uses of Priority in tuwien.auto.calimero.datapoint

Methods in tuwien.auto.calimero.datapoint that return Priority

Priority

Datapoint.getPriority() Returns the KNX message priority assigned to this datapoint.

Methods in tuwien.auto.calimero.datapoint with parameters of type Priority

void	Datapoint.setPriority(Priority p) Sets the priority used for KNX messages of this datapoint.

Uses of Priority in tuwien.auto.calimero.link

Methods in tuwien.auto.calimero.link with parameters of type Priority

void	KNXNetworkLinkFT12.sendRequest(KNXAddress dst, Priority p, byte[] nsdu)
void	KNXNetworkLink.sendRequest(KNXAddress dst, Priority p, byte[] nsdu) Sends a link layer request message to the given destination.
void	KNXNetworkLinkIP.sendRequest(KNXAddress dst, Priority p, byte[] nsdu) Sends a link layer request message to the given destination.
void	KNXNetworkLinkFT12.sendRequestWait(KNXAddress dst, Priority p, byte[] nsdu)
void	KNXNetworkLink.sendRequestWait(KNXAddress dst, Priority p, byte[] nsdu) Sends a link layer request message to the given destination, and waits for the corresponding link layer confirmation.
void	KNXNetworkLinkIP.sendRequestWait(KNXAddress dst, Priority p, byte[] nsdu) Sends a link layer request message to the given destination, and waits for the corresponding link layer confirmation.

Uses of Priority in tuwien.auto.calimero.link.medium

Fields in tuwien.auto.calimero.link.medium declared as Priority

protected Priority

RawFrameBase.p Frame priority.

Methods in tuwien.auto.calimero.link.medium that return Priority

Priority

RawFrameBase.getPriority() Returns the message priority used for this frame.

Uses of Priority in tuwien.auto.calimero.mgmt

Methods in tuwien.auto.calimero.mgmt that return Priority

Priority	ManagementClient.getPriority() Returns the current used KNX message priority for KNX messages.
Priority	ManagementClientImpl.getPriority()

Methods in tuwien.auto.calimero.mgmt with parameters of type Priority

void	TransportLayerImpl.broadcast(boolean system, Priority p, byte[] tsdu)
void	TransportLayer.broadcast(boolean system, Priority p, byte[] tsdu) Broadcasts data in the KNX network.
void	TransportLayerImpl.sendData(Destination d, Priority p, byte[] tsdu)
void	TransportLayer.sendData(Destination d, Priority p, byte[] tsdu) Sends data to the given destination using connection oriented mode.
void	TransportLayerImpl.sendData(KNXAddress addr, Priority p, byte[] tsdu)
void	TransportLayer.sendData(KNXAddress addr, Priority p, byte[] tsdu) Sends data to the given KNX address using connectionless mode.
void	ManagementClient.setPriority(Priority p) Sets the KNX message priority for KNX messages to send.
void	ManagementClientImpl.setPriority(Priority p)

Uses of Priority in tuwien.auto.calimero.process

Methods in tuwien.auto.calimero.process that return Priority

Priority	ProcessCommunicatorImpl.getPriority()
Priority	ProcessCommunicator.getPriority() Returns the current used KNX message priority for KNX messages.

Methods in tuwien.auto.calimero.process with parameters of type Priority

void	ProcessCommunicatorImpl.setPriority(Priority p)
void	ProcessCommunicator.setPriority(Priority p) Sets the KNX message priority for KNX messages to send.