A B C D E F G H I K L M N O P Q R S T U V W X Y

G

get(Object) - Method in interface tuwien.auto.calimero.buffer.cache.Cache

Gets the CacheObject associated with key from the cache.

get(Object) - Method in class tuwien.auto.calimero.buffer.cache.LFUCache

get(Object) - Method in class tuwien.auto.calimero.buffer.cache.PositiveListCache

get(GroupAddress) - Method in class tuwien.auto.calimero.datapoint.DatapointMap

get(GroupAddress) - Method in interface tuwien.auto.calimero.datapoint.DatapointModel

Returns the datapoint identified using the specified main address, if found in this model.

get(int) - Static method in class tuwien.auto.calimero.Priority

Returns the priority of the supplied priority value code.

get(String) - Static method in class tuwien.auto.calimero.Priority

Returns the priority of the supplied priority value representation.

getAckType() - Method in class tuwien.auto.calimero.link.medium.RawAckBase

Returns the type of acknowledge transmitted with this frame.

getAdditionalInfo() - Method in class tuwien.auto.calimero.cemi.CEMILDataEx

Returns all additional information currently set.

getAdditionalInfo(int) - Method in class tuwien.auto.calimero.cemi.CEMILDataEx

Returns additional information data corresponding to the supplied type ID, if it is contained in the message.

getAddress() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns the device individual address.

getAddress() - Method in class tuwien.auto.calimero.knxnetip.util.HPAI

Returns the IP network address as InetAddress representation.

getAddress() - Method in class tuwien.auto.calimero.mgmt.Destination

Returns the destination address.

getAddresses(boolean) - Method in class tuwien.auto.calimero.datapoint.StateDP

Returns the collection of KNX group addresses which are allowed to alter the state of this datapoint.

getAllBuffers() - Static method in class tuwien.auto.calimero.buffer.NetworkBuffer

Returns all network buffers currently in use.

getAllGlobalWriter() - Method in class tuwien.auto.calimero.log.LogManager

Returns all registered global log writer.

getAllLogServices() - Method in class tuwien.auto.calimero.log.LogManager

Returns the names of all registered log services.

getAllMainTypes() - Static method in class tuwien.auto.calimero.dptxlator.TranslatorTypes

Returns all available data types which have a DPT translator implementation assigned.

getAllPropertyTypes() - Static method in class tuwien.auto.calimero.dptxlator.PropertyTypes

Returns all property types which have an associated (but not necessarily implemented/available) DPT translator.

getAllValues() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator

Returns all translation items as strings currently contained in this translator.

getAllValues() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator2ByteFloat

getAllValues() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator2ByteUnsigned

getAllValues() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator3BitControlled

getAllValues() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator4ByteUnsigned

getAllValues() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator8BitUnsigned

getAllValues() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorBoolean

getAllValues() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDate

getAllValues() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

getAllValues() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorString

getAllValues() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorTime

getAPDUService(byte[]) - Static method in class tuwien.auto.calimero.DataUnitBuilder

Returns the application layer service of a given protocol data unit.

getArea() - Method in class tuwien.auto.calimero.IndividualAddress

Returns the area address.

getArgument() - Method in exception tuwien.auto.calimero.exception.KNXIllegalArgumentException

Returns the argument which caused the exception.

getASDU() - Method in class tuwien.auto.calimero.process.ProcessEvent

Returns the application layer service data unit (ASDU).

getAssignedAddress() - Method in class tuwien.auto.calimero.knxnetip.util.TunnelCRD

Returns the assigned address for the tunneling connection.

getAttribute(String) - Method in class tuwien.auto.calimero.xml.def.DefaultElement

getAttribute(String) - Method in interface tuwien.auto.calimero.xml.Element

Returns the value of the attribute with name.

getBadItem() - Method in exception tuwien.auto.calimero.xml.KNXMLException

Returns the processed item which caused this exception.

getBaseLink() - Method in interface tuwien.auto.calimero.buffer.Configuration

Returns the KNX network link used to create this configuration.

getBaudRate() - Method in class tuwien.auto.calimero.serial.FT12Connection

Returns the currently used baud rate.

getBaudRate() - Method in class tuwien.auto.calimero.serial.LibraryAdapter

Returns the currently used baud rate.

getBitError() - Method in class tuwien.auto.calimero.cemi.CEMIBusMon

Returns the bit error flag state set in the status information.

getBuffer(String) - Static method in class tuwien.auto.calimero.buffer.NetworkBuffer

Returns the network buffer for the given installation ID.

getBufferedLink() - Method in interface tuwien.auto.calimero.buffer.Configuration

Returns the buffered network link for the network buffer of this configuration.

getBundleListing() - Static method in class tuwien.auto.calimero.Settings

Returns a listing containing all library bundles stating the bundle's presence for use.

getCache() - Method in interface tuwien.auto.calimero.buffer.Configuration

Returns the currently used cache object or null, if no cache was set.

getCEMI() - Method in class tuwien.auto.calimero.knxnetip.servicetype.RoutingIndication

Returns the cEMI frame contained in the indication.

getCEMI() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ServiceRequest

Returns the cEMI frame carried by the request.

getChannelID() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectionstateRequest

Returns the communication channel ID of the connection this connection state request belongs to.

getChannelID() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectionstateResponse

Returns the communication channel ID used for the response.

getChannelID() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectResponse

Returns the communication channel ID on a successful established connection.

getChannelID() - Method in class tuwien.auto.calimero.knxnetip.servicetype.DisconnectRequest

Returns the communication channel identifier of the connection being closed.

getChannelID() - Method in class tuwien.auto.calimero.knxnetip.servicetype.DisconnectResponse

Returns the communication channel identifier, matching the ID in the corresponding disconnect request for closing the connection.

getChannelID() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ServiceAck

Returns the communication channel identifier associated with the acknowledge.

getChannelID() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ServiceRequest

Returns the communication channel identifier associated with the request.

getCharacterData() - Method in class tuwien.auto.calimero.xml.def.DefaultElement

getCharacterData() - Method in interface tuwien.auto.calimero.xml.Element

Returns the character data contained in this element.

getChecksum() - Method in class tuwien.auto.calimero.link.medium.PL132Ack

Returns the checksum contained in this acknowledge frame.

getChecksum() - Method in class tuwien.auto.calimero.link.medium.RawFrameBase

Returns the frame checksum as contained in the frame.

getConfiguration(KNXNetworkLink) - Method in class tuwien.auto.calimero.buffer.NetworkBuffer

Gets the configuration which provides the buffered link.

getControlBit() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator3BitControlled

Returns the control field of the first translation item.

getControlDPT() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator3BitControlled.DPT3BitControlled

Returns the DPT used to represent the control information of this DPT.

getControlEndpoint() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectionstateRequest

Returns the client control endpoint the server replies to.

getControlEndpoint() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectRequest

Returns the local control endpoint used for the connection.

getControlEndpoint() - Method in class tuwien.auto.calimero.knxnetip.servicetype.SearchResponse

Returns the server control endpoint.

getCount() - Method in class tuwien.auto.calimero.buffer.cache.CacheObject

Returns the access count this cache object was queried from the cache.

getCRD() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectResponse

Returns the connection response data supplied in the response on a successful established connection.

getCRI() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectRequest

Returns the connect request information used in the request.

getCurrent() - Method in class tuwien.auto.calimero.xml.def.DefaultXMLReader

getCurrent() - Method in interface tuwien.auto.calimero.xml.XMLReader

Returns the current element read with the last invocation of XMLReader.read().

getCurrentElements() - Method in class tuwien.auto.calimero.mgmt.Description

Returns the current number of elements in the property.

getData() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator

Returns a copy of all items stored by this translator translated into DPTs.

getData(byte[], int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlator

Copies KNX DPT value items stored by this translator into dst, starting at offset.

getData(byte[], int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlator2ByteFloat

getData(byte[], int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlator2ByteUnsigned

getData(byte[], int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlator3BitControlled

getData(byte[], int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlator4ByteUnsigned

getData(byte[], int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlator8BitUnsigned

getData(byte[], int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorBoolean

getData(byte[], int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDate

getData(byte[], int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

getData(byte[], int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorString

getData(byte[], int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorTime

getData() - Method in class tuwien.auto.calimero.knxnetip.util.ManufacturerDIB

Returns the manufacturer specific description data.

getDataEndpoint() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectRequest

Returns the local data endpoint used for the connection.

getDataEndpoint() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectResponse

Returns the server data endpoint used for the communication on a successful established connection.

getDatapointModel() - Method in interface tuwien.auto.calimero.buffer.Configuration

Returns the datapoint model set for this configuration, if any.

getDatapoints() - Method in class tuwien.auto.calimero.datapoint.DatapointMap

Returns all datapoints currently contained in this map.

getDateTimeFlag(int) - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

Returns the information value of field.

getDay() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDate

Returns the day information.

getDay() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

Returns the day of month information.

getDayOfWeek() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

Returns the day of week information.

getDayOfWeek() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorTime

Returns the day of week information.

getDefinitions() - Static method in class tuwien.auto.calimero.mgmt.PropertyClient

Returns the property definitions used by property clients, if definitions were loaded.

getDescription() - Method in class tuwien.auto.calimero.dptxlator.DPT

Returns the DPT description.

getDescription() - Method in class tuwien.auto.calimero.dptxlator.TranslatorTypes.MainType

Returns the description to this main type, if any.

getDescription(InetSocketAddress, int) - Method in class tuwien.auto.calimero.knxnetip.Discoverer

Sends a description request to server and waits at most timeout seconds for the answer message to arrive.

getDescription(int, int, int) - Method in class tuwien.auto.calimero.mgmt.KnIPDeviceMgmtAdapter

getDescription(int, int, int) - Method in interface tuwien.auto.calimero.mgmt.PropertyAdapter

Reads the description of a property of an interface object.

getDescription(int, int) - Method in class tuwien.auto.calimero.mgmt.PropertyClient

Gets the property description based on the property ID.

getDescription(int, int, int) - Method in class tuwien.auto.calimero.mgmt.RemotePropertyServiceAdapter

getDescriptionByIndex(int, int) - Method in class tuwien.auto.calimero.mgmt.PropertyClient

Gets the property description based on the property index.

getDescTypeCode() - Method in class tuwien.auto.calimero.knxnetip.util.DIB

Returns the description type code of this DIB.

getDestination() - Method in class tuwien.auto.calimero.cemi.CEMILData

Returns the KNX destination address.

getDestination() - Method in class tuwien.auto.calimero.link.medium.RawFrameBase

Returns the KNX destination address.

getDestination() - Method in class tuwien.auto.calimero.mgmt.Destination.AggregatorProxy

Returns the destination associated with this proxy.

getDestination() - Method in exception tuwien.auto.calimero.mgmt.KNXDisconnectException

Returns the destination which caused this exception.

getDestination() - Method in class tuwien.auto.calimero.process.ProcessEvent

Returns the KNX destination group address.

getDevice() - Method in class tuwien.auto.calimero.IndividualAddress

Returns the device address.

getDevice() - Method in class tuwien.auto.calimero.knxnetip.servicetype.DescriptionResponse

Returns the device description information block contained in the response.

getDevice() - Method in class tuwien.auto.calimero.knxnetip.servicetype.SearchResponse

Returns the device description information block of the server contained in the response.

getDeviceAddress() - Method in class tuwien.auto.calimero.link.medium.KNXMediumSettings

Returns the device individual address.

getDeviceState() - Method in class tuwien.auto.calimero.knxnetip.LostMessageEvent

Returns the router device state.

getDeviceState() - Method in class tuwien.auto.calimero.knxnetip.servicetype.RoutingLostMessage

Returns the router device state, i.e. the property referred to by PID 69 of object type 11 in the KNX property table.

getDeviceStatus() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns the device status byte.

getDomainAddress() - Method in class tuwien.auto.calimero.link.medium.PL110LData

Returns the domain address of this frame.

getDomainAddress() - Method in class tuwien.auto.calimero.link.medium.PL132LData

Returns the domain address of this frame.

getDomainAddress() - Method in class tuwien.auto.calimero.link.medium.PLSettings

Returns the domain address.

getDomainAddress() - Method in class tuwien.auto.calimero.link.medium.RFSettings

Returns the domain address.

getDPT() - Method in class tuwien.auto.calimero.datapoint.Datapoint

Returns the datapoint type ID of a DPT translator to use for datapoint value translation.

getDPT() - Method in class tuwien.auto.calimero.dptxlator.PropertyTypes.DPTID

Returns the datapoint type ID to be used in the translator.

getDPT() - Method in class tuwien.auto.calimero.mgmt.PropertyClient.Property

Returns the datapoint type ID used for the property elements.

getElementCount() - Method in class tuwien.auto.calimero.cemi.CEMIDevMgmt

Returns the number of elements field from the message.

getEmptyServiceRequest(KNXnetIPHeader, byte[], int) - Static method in class tuwien.auto.calimero.knxnetip.servicetype.PacketHelper

Internal use only.

getEndpoint() - Method in class tuwien.auto.calimero.knxnetip.servicetype.DescriptionRequest

Returns the client control endpoint.

getEndpoint() - Method in class tuwien.auto.calimero.knxnetip.servicetype.DisconnectRequest

Returns the client control endpoint.

getEndpoint() - Method in class tuwien.auto.calimero.knxnetip.servicetype.SearchRequest

Returns the client discovery endpoint.

getErrorHandler() - Static method in class tuwien.auto.calimero.log.LogWriter

Returns the used error handler.

getErrorMessage() - Method in class tuwien.auto.calimero.cemi.CEMIDevMgmt

Returns a descriptive error message on a negative response, as determined by CEMIDevMgmt.isNegativeResponse().

getErrorMessage(int) - Static method in class tuwien.auto.calimero.knxnetip.servicetype.ErrorCodes

Returns a brief description message for an error code.

getExpectedDataLength() - Method in class tuwien.auto.calimero.link.medium.TP1LPollData

Returns the length of expected poll data.

getExpirationTimeout() - Method in class tuwien.auto.calimero.datapoint.StateDP

Returns the expiration timeout for datapoint state values related to this datapoint.

getFamilies() - Method in class tuwien.auto.calimero.knxnetip.util.SuppFamiliesDIB

Returns all supported service families, each family together with the version it is implemented and supported up to.

getFamilyName(short) - Method in class tuwien.auto.calimero.knxnetip.util.SuppFamiliesDIB

Returns the service family name for the supplied family ID.

getFileName() - Method in class tuwien.auto.calimero.log.LogFileWriter

Returns the file name of the file resource used by this LogFileWriter or "" if the log writer has already been closed.

getFrame() - Method in class tuwien.auto.calimero.buffer.LDataObject

Returns a CEMILData frame contained in this cache object.

getFrame() - Method in class tuwien.auto.calimero.buffer.LDataObjectQueue

Returns a CEMILData frame contained in this cache object.

getFrame() - Method in class tuwien.auto.calimero.buffer.LDataObjectQueue.QueueItem

Returns the L-Data frame for this item.

getFrame() - Method in class tuwien.auto.calimero.FrameEvent

Returns the cEMI frame, if supplied at event creation.

getFrameBytes() - Method in class tuwien.auto.calimero.FrameEvent

Returns the frame as byte array, if supplied at event creation.

getFrameError() - Method in class tuwien.auto.calimero.cemi.CEMIBusMon

Returns the frame error flag state set in the status information.

getFrames() - Method in class tuwien.auto.calimero.buffer.LDataObjectQueue

Returns all L-Data frames currently hold by the queue.

getFrameType() - Method in class tuwien.auto.calimero.link.medium.RawAckBase

getFrameType() - Method in interface tuwien.auto.calimero.link.medium.RawFrame

Returns the type of this frame.

getFrameType() - Method in class tuwien.auto.calimero.link.medium.RawFrameBase

getHopCount() - Method in class tuwien.auto.calimero.cemi.CEMILData

Returns the hop count set in the control information.

getHopCount() - Method in class tuwien.auto.calimero.knxnetip.KNXnetIPRouter

Returns the default hop count (TTL) used in the IP header of encapsulated cEMI messages.

getHopCount() - Method in interface tuwien.auto.calimero.link.KNXNetworkLink

Returns the hop count used as default for KNX messages.

getHopCount() - Method in class tuwien.auto.calimero.link.KNXNetworkLinkFT12

getHopCount() - Method in class tuwien.auto.calimero.link.KNXNetworkLinkIP

getHopcount() - Method in class tuwien.auto.calimero.link.medium.RawFrameBase

Returns the hop count of this frame.

getHostAddress() - Method in class tuwien.auto.calimero.log.LogNetWriter

Returns the remote host IP address of this log writer, or "" if the connection was closed.

getHostName() - Method in class tuwien.auto.calimero.log.LogNetWriter

Returns the remote host name of this log writer, or "" if the connection was closed.

getHostProtocol() - Method in class tuwien.auto.calimero.knxnetip.util.HPAI

Returns the host protocol of this HPAI.

getHour() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

Returns the hour information.

getHour() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorTime

Returns the hour information.

getID() - Method in class tuwien.auto.calimero.dptxlator.DPT

Returns the DPT identifier.

getID() - Method in class tuwien.auto.calimero.knxnetip.util.ManufacturerDIB

Returns the KNX manufacturer ID.

getInfo() - Method in class tuwien.auto.calimero.cemi.CEMILDataEx.AddInfo

Returns the additional information data wrapped by this type.

getInitiator() - Method in class tuwien.auto.calimero.knxnetip.ConnectionCloseEvent

Returns the initiator of the close event, one of ConnectionCloseEvent.CLIENT, ConnectionCloseEvent.SERVER or ConnectionCloseEvent.INTERNAL.

getInputReader(InputStream) - Method in class tuwien.auto.calimero.xml.def.DefaultEntityResolver

getInputReader(InputStream) - Method in interface tuwien.auto.calimero.xml.EntityResolver

Creates an Reader using the supplied input stream.

getInputStream() - Method in class tuwien.auto.calimero.serial.LibraryAdapter

Returns the input stream for the opened serial communication port.

getInstallation() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns the installation number for the device.

getInstallationID() - Method in class tuwien.auto.calimero.buffer.NetworkBuffer

Returns the installation identifier of this network buffer.

getInstance() - Static method in class tuwien.auto.calimero.xml.XMLFactory

Gets the XML factory.

getIntervals() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator3BitControlled

Returns the number of intervals specified by the stepcode of the first translation item.

getItem() - Method in class tuwien.auto.calimero.buffer.LDataObjectQueue

Returns the next queued item in insertion order.

getItem() - Method in exception tuwien.auto.calimero.exception.KNXFormatException

Returns the value, content or piece of information which caused the exception.

getItems() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator

Returns the number of translation items currently in the translator.

getKey() - Method in class tuwien.auto.calimero.buffer.cache.CacheObject

Returns the key associated with this cache object.

getKNXLayer() - Method in class tuwien.auto.calimero.knxnetip.util.TunnelCRI

Returns the KNX tunneling layer.

getKNXMedium() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns the KNX medium code.

getKNXMedium() - Method in interface tuwien.auto.calimero.link.KNXNetworkLink

Returns the KNX medium settings used by this network link.

getKNXMedium() - Method in class tuwien.auto.calimero.link.KNXNetworkLinkFT12

getKNXMedium() - Method in class tuwien.auto.calimero.link.KNXNetworkLinkIP

getKNXMedium() - Method in interface tuwien.auto.calimero.link.KNXNetworkMonitor

Returns the KNX medium settings used by this monitor link.

getKNXMedium() - Method in class tuwien.auto.calimero.link.KNXNetworkMonitorFT12

getKNXMedium() - Method in class tuwien.auto.calimero.link.KNXNetworkMonitorIP

getKNXMediumString() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns a textual representation of the KNX medium code.

getLibraryHeader(boolean) - Static method in class tuwien.auto.calimero.Settings

Returns a default library header representation with general/usage information.

getLibraryVersion() - Static method in class tuwien.auto.calimero.Settings

Returns the Calimero library version as string representation.

getLine() - Method in class tuwien.auto.calimero.IndividualAddress

Returns the line address.

getLineNumber() - Method in class tuwien.auto.calimero.xml.def.DefaultXMLReader

getLineNumber() - Method in exception tuwien.auto.calimero.xml.KNXMLException

Returns the line number in the processed resource.

getLineNumber() - Method in interface tuwien.auto.calimero.xml.XMLReader

Returns the line number for the current position in a XML input source processed by this XML reader.

getLogLevel() - Method in class tuwien.auto.calimero.log.LogService

Returns the currently set log level of this log service.

getLogLevel() - Method in class tuwien.auto.calimero.log.LogWriter

Returns the log level used for deciding which messages will be logged.

getLogService(String) - Method in class tuwien.auto.calimero.log.LogManager

Queries for a log service with the specified name.

getLost() - Method in class tuwien.auto.calimero.cemi.CEMIBusMon

Returns the lost flag state set in the status information.

getLostMessages() - Method in class tuwien.auto.calimero.knxnetip.LostMessageEvent

Returns the total of lost messages maintained by the KNXnet/IP router.

getLostMessages() - Method in class tuwien.auto.calimero.knxnetip.servicetype.RoutingLostMessage

The number of lost KNXnet/IP routing messages.

getLowerValue() - Method in class tuwien.auto.calimero.dptxlator.DPT

Returns a lower value information.

getMACAddress() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns the device Ethernet MAC address.

getMACAddressString() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns a textual representation of the device Ethernet MAC address.

getMainAddress() - Method in class tuwien.auto.calimero.datapoint.Datapoint

Returns the datapoint main address, a KNX group address identifying this datapoint.

getMainGroup() - Method in class tuwien.auto.calimero.GroupAddress

Returns the main group value.

getMainNumber() - Method in class tuwien.auto.calimero.datapoint.Datapoint

Returns the main number of the data type to use for datapoint value translation.

getMainNumber() - Method in class tuwien.auto.calimero.dptxlator.PropertyTypes.DPTID

Returns the main number of the translator data type.

getMainNumber() - Method in class tuwien.auto.calimero.dptxlator.TranslatorTypes.MainType

Returns the data type main number.

getMainType(int) - Static method in class tuwien.auto.calimero.dptxlator.TranslatorTypes

Returns the TranslatorTypes.MainType object assigned the given data type main number.

getManager() - Static method in class tuwien.auto.calimero.log.LogManager

Returns the only instance of the log manager.

getManufacturerData() - Method in class tuwien.auto.calimero.knxnetip.servicetype.DescriptionResponse

Returns the manufacturer data description information block optionally contained in the response.

getMaxElements() - Method in class tuwien.auto.calimero.mgmt.Description

Returns the maximum number of elements allowed in the property.

getMaxSize() - Method in class tuwien.auto.calimero.log.LogFileWriter

Returns the maximum allowed file size generated by this LogFileWriter, or 0 if no maximum was set.

getMedium() - Method in class tuwien.auto.calimero.link.medium.KNXMediumSettings

Returns the KNX medium type identifier specifying the communication medium this setting object is for.

getMedium() - Method in class tuwien.auto.calimero.link.medium.PLSettings

getMedium() - Method in class tuwien.auto.calimero.link.medium.RFSettings

getMedium() - Method in class tuwien.auto.calimero.link.medium.TPSettings

getMediumString() - Method in class tuwien.auto.calimero.link.medium.KNXMediumSettings

Returns a textual representation of the KNX medium type.

getMessageCode() - Method in interface tuwien.auto.calimero.cemi.CEMI

Returns the cEMI message code.

getMessageCode() - Method in class tuwien.auto.calimero.cemi.CEMIBusMon

getMessageCode() - Method in class tuwien.auto.calimero.cemi.CEMIDevMgmt

getMessageCode() - Method in class tuwien.auto.calimero.cemi.CEMILData

getMiddleGroup() - Method in class tuwien.auto.calimero.GroupAddress

Returns the middle group value for the 3-level group notation.

getMinute() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

Returns the minute information.

getMinute() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorTime

Returns the minute information.

getMonth() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDate

Returns the month information.

getMonth() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

Returns the month information.

getMulticastAddress() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns the device routing multicast address.

getName() - Method in class tuwien.auto.calimero.datapoint.Datapoint

Returns the datapoint name.

getName() - Method in interface tuwien.auto.calimero.knxnetip.KNXnetIPConnection

Returns the name of this connection, a brief textual representation to identify a KNXnet/IP connection.

getName() - Method in class tuwien.auto.calimero.knxnetip.KNXnetIPDevMgmt

getName() - Method in class tuwien.auto.calimero.knxnetip.KNXnetIPRouter

getName() - Method in class tuwien.auto.calimero.knxnetip.KNXnetIPTunnel

getName() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns the device friendly name.

getName() - Method in interface tuwien.auto.calimero.link.KNXNetworkLink

Returns the name of the link, a short textual representation to identify a link.

getName() - Method in class tuwien.auto.calimero.link.KNXNetworkLinkFT12

getName() - Method in class tuwien.auto.calimero.link.KNXNetworkLinkIP

getName() - Method in interface tuwien.auto.calimero.link.KNXNetworkMonitor

Returns the name of the monitor, a short textual representation to identify a network monitor.

getName() - Method in class tuwien.auto.calimero.link.KNXNetworkMonitorFT12

Returns the name of the monitor, a short textual representation to identify a network monitor.

getName() - Method in class tuwien.auto.calimero.link.KNXNetworkMonitorIP

Returns the name of the monitor, a short textual representation to identify a network monitor.

getName() - Method in class tuwien.auto.calimero.log.LogService

Returns the name of this log service.

getName() - Method in class tuwien.auto.calimero.mgmt.KnIPDeviceMgmtAdapter

Returns the name for identifying this adapter and its destination.

getName() - Method in interface tuwien.auto.calimero.mgmt.PropertyAdapter

Returns the name for identifying this adapter and its destination.

getName() - Method in class tuwien.auto.calimero.mgmt.PropertyClient.Property

Returns the property friendly name, a more readable name of the property.

getName() - Method in class tuwien.auto.calimero.mgmt.RemotePropertyServiceAdapter

Returns the name for identifying this adapter and its destination.

getName() - Method in interface tuwien.auto.calimero.mgmt.TransportLayer

Returns the name of this transport layer, a short textual representation to identify this layer.

getName() - Method in class tuwien.auto.calimero.mgmt.TransportLayerImpl

Returns the name of this transport layer, a short textual representation to identify this layer.

getName() - Method in class tuwien.auto.calimero.xml.Attribute

Returns the attribute name.

getName() - Method in class tuwien.auto.calimero.xml.def.DefaultElement

getName() - Method in interface tuwien.auto.calimero.xml.Element

Returns the name of this element, the element type.

getNetworkFilter() - Method in interface tuwien.auto.calimero.buffer.Configuration

Returns the filter applied on incoming messages from the KNX network.

getNextIndication() - Method in class tuwien.auto.calimero.buffer.CommandFilter

Returns the next available indication.

getObjectIndex() - Method in class tuwien.auto.calimero.mgmt.Description

Returns the device unique object index contained the property.

getObjectInstance() - Method in class tuwien.auto.calimero.cemi.CEMIDevMgmt

Returns the object instance field from the message.

getObjectType() - Method in class tuwien.auto.calimero.cemi.CEMIDevMgmt

Returns the interface object type.

getObjectType() - Method in class tuwien.auto.calimero.mgmt.Description

Returns the object type to which the property belongs to.

getObjectType() - Method in class tuwien.auto.calimero.mgmt.PropertyClient.Property

Returns the interface object type the property belongs to.

getObjectTypeName(int) - Static method in class tuwien.auto.calimero.mgmt.PropertyClient

Returns the object type name associated to the requested object type.

getOutputStream() - Method in class tuwien.auto.calimero.serial.LibraryAdapter

Returns the output stream for the opened serial communication port.

getParityError() - Method in class tuwien.auto.calimero.cemi.CEMIBusMon

Returns the parity error flag state set in the status information.

getPayload() - Method in interface tuwien.auto.calimero.cemi.CEMI

Returns the payload carried in this cEMI message.

getPayload() - Method in class tuwien.auto.calimero.cemi.CEMIBusMon

Returns the raw frame on medium (the data link PDU inclusive FCS) contained in this busmonitor indication message.

getPayload() - Method in class tuwien.auto.calimero.cemi.CEMIDevMgmt

Returns the data part, i.e. the property data or error information following the start index in the message structure.

getPayload() - Method in class tuwien.auto.calimero.cemi.CEMILData

Returns the L-Data TPDU.

getPDT() - Method in class tuwien.auto.calimero.mgmt.Description

Returns the property data type.

getPDT() - Method in class tuwien.auto.calimero.mgmt.PropertyClient.Property

Returns the property data type used for the property elements.

getPID() - Method in class tuwien.auto.calimero.cemi.CEMIDevMgmt

Returns the property identifier used in the message.

getPID() - Method in class tuwien.auto.calimero.mgmt.Description

Returns the property identifier.

getPID() - Method in class tuwien.auto.calimero.mgmt.PropertyClient.Property

Returns the property identifier.

getPIDName() - Method in class tuwien.auto.calimero.mgmt.PropertyClient.Property

Returns the PID name as string representation.

getPort() - Method in class tuwien.auto.calimero.knxnetip.util.HPAI

Returns the port number of this HPAI.

getPort() - Method in class tuwien.auto.calimero.log.LogNetWriter

Returns the destination port of this log writer, or 0 if the connection was closed.

getPortID() - Method in class tuwien.auto.calimero.serial.FT12Connection

Returns the port identifier used in this connection.

getPortID() - Method in exception tuwien.auto.calimero.serial.KNXPortClosedException

Returns the serial port identifier supplied with this exception.

getPortIdentifiers() - Static method in class tuwien.auto.calimero.serial.FT12Connection

Attempts to gets the available serial communication ports on the host.

getPosition() - Method in class tuwien.auto.calimero.xml.def.DefaultXMLReader

getPosition() - Method in interface tuwien.auto.calimero.xml.XMLReader

Returns the current logical position in a XML document for this XML reader.

getPositiveList() - Method in class tuwien.auto.calimero.buffer.cache.PositiveListCache

Returns the positive list currently used by this cache.

getPriority() - Method in class tuwien.auto.calimero.cemi.CEMILData

Returns the message priority.

getPriority() - Method in class tuwien.auto.calimero.datapoint.Datapoint

Returns the KNX message priority assigned to this datapoint.

getPriority() - Method in class tuwien.auto.calimero.link.medium.RawFrameBase

Returns the message priority used for this frame.

getPriority() - Method in interface tuwien.auto.calimero.mgmt.ManagementClient

Returns the current used KNX message priority for KNX messages.

getPriority() - Method in class tuwien.auto.calimero.mgmt.ManagementClientImpl

getPriority() - Method in interface tuwien.auto.calimero.process.ProcessCommunicator

Returns the current used KNX message priority for KNX messages.

getPriority() - Method in class tuwien.auto.calimero.process.ProcessCommunicatorImpl

getProject() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns the project number for the device.

getProjectInstallID() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns the project-installation identifier of this device.

getProperty(int, int, int, int) - Method in class tuwien.auto.calimero.mgmt.KnIPDeviceMgmtAdapter

getProperty(int, int, int, int) - Method in interface tuwien.auto.calimero.mgmt.PropertyAdapter

Gets property value elements in an interface object property.

getProperty(int, int) - Method in class tuwien.auto.calimero.mgmt.PropertyClient

Gets the first property element using the associated property data type of the requested property.

getProperty(int, int, int, int) - Method in class tuwien.auto.calimero.mgmt.PropertyClient

Gets one or more elements of a property.

getProperty(int, int, int, int) - Method in class tuwien.auto.calimero.mgmt.RemotePropertyServiceAdapter

getPropertyTranslated(int, int, int, int) - Method in class tuwien.auto.calimero.mgmt.PropertyClient

Gets one or more elements of a property with the returned data set in a DPT translator of the associated data type.

getPropIndex() - Method in class tuwien.auto.calimero.mgmt.Description

Returns the property index.

getRawAddress() - Method in class tuwien.auto.calimero.KNXAddress

Returns the KNX address in 16 Bit value representation.

getRawAddress() - Method in class tuwien.auto.calimero.knxnetip.util.HPAI

Returns the raw IP network address.

getRawFrame() - Method in class tuwien.auto.calimero.link.event.MonitorFrameEvent

Returns the decoded raw frame on medium.

getReadLevel() - Method in class tuwien.auto.calimero.mgmt.Description

Returns the read access level for the property.

getReason() - Method in class tuwien.auto.calimero.CloseEvent

Returns a brief textual description of the closing reason.

getRemoteAddress() - Method in interface tuwien.auto.calimero.knxnetip.KNXnetIPConnection

Returns the address (endpoint) this connection endpoint is communicating to.

getRequestFilter() - Method in interface tuwien.auto.calimero.buffer.Configuration

Returns the filter responsible for handling requests.

getResponseTimeout() - Method in interface tuwien.auto.calimero.mgmt.ManagementClient

Returns the response timeout used when waiting for a KNX response message to arrive.

getResponseTimeout() - Method in class tuwien.auto.calimero.mgmt.ManagementClientImpl

getResponseTimeout() - Method in interface tuwien.auto.calimero.process.ProcessCommunicator

Returns the response timeout used when waiting for a KNX response message to arrive.

getResponseTimeout() - Method in class tuwien.auto.calimero.process.ProcessCommunicatorImpl

getSearchResponses() - Method in class tuwien.auto.calimero.knxnetip.Discoverer

Returns all collected search responses received by searches so far.

getSecond() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

Returns the second information.

getSecond() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorTime

Returns the second information.

getSeqReceive() - Method in class tuwien.auto.calimero.mgmt.Destination.AggregatorProxy

Returns the receive sequence number of the connection.

getSeqSend() - Method in class tuwien.auto.calimero.mgmt.Destination.AggregatorProxy

Returns the send sequence number of the connection.

getSequenceNumber() - Method in class tuwien.auto.calimero.cemi.CEMIBusMon

Returns the sequence number set in the status information.

getSequenceNumber() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ServiceAck

Returns the sequence number.

getSequenceNumber() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ServiceRequest

Returns the sequence number of the sending endpoint.

getSerialNumber() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns the KNX serial number of the device.

getSerialNumber() - Method in class tuwien.auto.calimero.link.medium.RFSettings

Returns the serial number of the device.

getSerialNumberString() - Method in class tuwien.auto.calimero.knxnetip.util.DeviceDIB

Returns a textual representation of the device KNX serial number.

getServiceFamilies() - Method in class tuwien.auto.calimero.knxnetip.servicetype.DescriptionResponse

Returns the supported service families description information block.

getServiceFamilies() - Method in class tuwien.auto.calimero.knxnetip.servicetype.SearchResponse

Returns the supported service families description information block of the server contained in the response.

getServiceRequest(KNXnetIPHeader, byte[], int) - Static method in class tuwien.auto.calimero.knxnetip.servicetype.PacketHelper

Creates a new service request using the data byte array and information from the KNXnet/IP header.

getServiceType() - Method in class tuwien.auto.calimero.knxnetip.servicetype.KNXnetIPHeader

Returns the service type identifier.

getServiceType() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ServiceAck

Returns the service type identifier of the acknowledge.

getServiceType() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ServiceRequest

Returns the service type identifier of the request.

getSize() - Method in class tuwien.auto.calimero.buffer.LDataObjectQueue

Returns the number of frames currently in the queue.

getSource() - Method in class tuwien.auto.calimero.cemi.CEMILData

Returns the KNX individual source address.

getSource() - Method in class tuwien.auto.calimero.link.medium.RawFrameBase

Returns the KNX individual source address.

getSourceAddr() - Method in class tuwien.auto.calimero.process.ProcessEvent

Returns the KNX individual source address.

getStartIndex() - Method in class tuwien.auto.calimero.cemi.CEMIDevMgmt

Returns the start index in the data array of the property.

getState() - Method in interface tuwien.auto.calimero.knxnetip.KNXnetIPConnection

Returns information about the current KNXnet/IP communication state.

getState() - Method in class tuwien.auto.calimero.mgmt.Destination

Returns the state of this destination.

getState() - Method in class tuwien.auto.calimero.serial.FT12Connection

Returns information about the current FT1.2 communication state.

getStatus() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectionstateResponse

Returns the status of the connection.

getStatus() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectResponse

Returns the status code, indicating success or some error condition.

getStatus() - Method in class tuwien.auto.calimero.knxnetip.servicetype.DisconnectResponse

Returns the status code, signaling the final state.

getStatus() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ServiceAck

Returns the status code of the acknowledge, regarding the corresponding request.

getStatusString() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectionstateResponse

Returns a textual representation of the status code.

getStatusString() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ConnectResponse

Returns a textual representation of the status code.

getStatusString() - Method in class tuwien.auto.calimero.knxnetip.servicetype.ServiceAck

Returns a textual representation of the status code.

getStepCode() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator3BitControlled

Returns the stepcode of the first translation item.

getStructLength() - Method in interface tuwien.auto.calimero.cemi.CEMI

Returns the length of this cEMI message frame.

getStructLength() - Method in class tuwien.auto.calimero.cemi.CEMIBusMon

getStructLength() - Method in class tuwien.auto.calimero.cemi.CEMIDevMgmt

getStructLength() - Method in class tuwien.auto.calimero.cemi.CEMILData

getStructLength() - Method in class tuwien.auto.calimero.cemi.CEMILDataEx

getStructLength() - Method in class tuwien.auto.calimero.knxnetip.servicetype.KNXnetIPHeader

Returns the length of the KNXnet/IP header structure.

getStructLength() - Method in class tuwien.auto.calimero.knxnetip.util.DIB

Returns the structure length of this DIB in bytes.

getStructLength() - Method in class tuwien.auto.calimero.knxnetip.util.HPAI

Returns the structure length of this HPAI in bytes.

getSubGroup11() - Method in class tuwien.auto.calimero.GroupAddress

Returns the sub group value for the 2-level group notation.

getSubGroup8() - Method in class tuwien.auto.calimero.GroupAddress

Returns the sub group value for the 3-level group notation.

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator

Returns all available, implemented subtypes for the translator.

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator2ByteFloat

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator2ByteUnsigned

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator3BitControlled

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator4ByteUnsigned

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator8BitUnsigned

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorBoolean

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDate

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorString

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorTime

getSubTypes() - Method in class tuwien.auto.calimero.dptxlator.TranslatorTypes.MainType

Returns a map containing all implemented subtypes.

getSubTypesStatic() - Static method in class tuwien.auto.calimero.dptxlator.DPTXlator

Returns all available subtypes for the translator class, equal to DPTXlator.getSubTypes(), every DPT translator has to implement this method.

getSubTypesStatic() - Static method in class tuwien.auto.calimero.dptxlator.DPTXlator2ByteFloat

getSubTypesStatic() - Static method in class tuwien.auto.calimero.dptxlator.DPTXlator2ByteUnsigned

getSubTypesStatic() - Static method in class tuwien.auto.calimero.dptxlator.DPTXlator3BitControlled

getSubTypesStatic() - Static method in class tuwien.auto.calimero.dptxlator.DPTXlator4ByteUnsigned

getSubTypesStatic() - Static method in class tuwien.auto.calimero.dptxlator.DPTXlator8BitUnsigned

getSubTypesStatic() - Static method in class tuwien.auto.calimero.dptxlator.DPTXlatorBoolean

getSubTypesStatic() - Static method in class tuwien.auto.calimero.dptxlator.DPTXlatorDate

getSubTypesStatic() - Static method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

getSubTypesStatic() - Static method in class tuwien.auto.calimero.dptxlator.DPTXlatorString

getSubTypesStatic() - Static method in class tuwien.auto.calimero.dptxlator.DPTXlatorTime

getSweepInterval() - Method in class tuwien.auto.calimero.buffer.cache.CacheSweeper

Returns the time interval between Cache.removeExpired() calls used by this cache sweeper.

getTimestamp() - Method in class tuwien.auto.calimero.buffer.cache.CacheObject

Returns the most up to date timestamp of the moment the current value object was assigned to this cache object, or the moment this object was Cache.put(CacheObject) into a cache.

getTimestamp() - Method in class tuwien.auto.calimero.buffer.LDataObjectQueue.QueueItem

Returns the timestamp for this item.

getTimestamp() - Method in class tuwien.auto.calimero.cemi.CEMIBusMon

Returns the timestamp value of the monitoring frame contained in the additional information.

getTimestamps() - Method in class tuwien.auto.calimero.buffer.LDataObjectQueue

Returns the timestamps of the frames hold by the queue.

getTimestampType() - Method in class tuwien.auto.calimero.cemi.CEMIBusMon

Returns the type of timestamp contained in the additional information.

getTotalLength() - Method in class tuwien.auto.calimero.knxnetip.servicetype.KNXnetIPHeader

Returns the total length of the KNXnet/IP frame the header is part of.

getTPDU() - Method in class tuwien.auto.calimero.link.medium.RawFrameBase

Returns a copy of the TPDU, if available.

getTPDUService(byte[]) - Static method in class tuwien.auto.calimero.DataUnitBuilder

Returns the transport layer service of a given protocol data unit.

getTranslator() - Method in class tuwien.auto.calimero.dptxlator.TranslatorTypes.MainType

Returns the translator class used for this main type.

getType() - Method in class tuwien.auto.calimero.cemi.CEMILDataEx.AddInfo

Returns the type of additional information (see ADDINFO_* constants in class CEMILDataEx).

getType() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator

Returns the datapoint type used by the translator for translation.

getType() - Method in class tuwien.auto.calimero.GroupAddress

getType() - Method in class tuwien.auto.calimero.IndividualAddress

getType() - Method in class tuwien.auto.calimero.KNXAddress

Returns the KNX address type, identifying a group or individual address.

getTypeSize() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator

Returns the KNX data type size in bytes for one value item.

getUnit() - Method in class tuwien.auto.calimero.dptxlator.DPT

Returns the unit of measure for this DPT.

getUpperValue() - Method in class tuwien.auto.calimero.dptxlator.DPT

Returns an upper value information.

getUsage() - Method in class tuwien.auto.calimero.buffer.cache.CacheObject

Returns the usage value of this cache object as defined by a particular cache.

getValue() - Method in class tuwien.auto.calimero.buffer.cache.CacheObject

Gets the value entry hold by this cache object.

getValue() - Method in class tuwien.auto.calimero.buffer.LDataObjectQueue

Gets the value entry hold by this cache object.

getValue() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator

Returns the first value stored by this translator formatted into a string, according to the subtype ID.

getValue() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator2ByteUnsigned

getValue() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator4ByteUnsigned

getValue() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator8BitUnsigned

getValue() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorBoolean

getValue() - Method in class tuwien.auto.calimero.xml.Attribute

Returns the value of this attribute.

getValueBoolean() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorBoolean

Returns the first translation item formatted as boolean.

getValueFloat() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator2ByteFloat

Returns the first translation item formatted as float.

getValueMilliseconds() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDate

Returns the date information in UTC milliseconds, using the translator default calendar.

getValueMilliseconds() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

Returns the date and time information of the first date/time item in UTC milliseconds, using the system default Calendar.

getValueMilliseconds() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorTime

Returns the time information in UTC milliseconds, using the translator default calendar.

getValues(int, byte[]) - Static method in class tuwien.auto.calimero.dptxlator.PropertyTypes

Utility method for retrieving the string representations of the KNX DPT data of the specified property data type.

getValueSigned() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator3BitControlled

Returns the value of the first translation item, with the absolute value representing the stepcode, and the sign representing the control bit.

getValueUnscaled() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator8BitUnsigned

Returns the first translation item without any scaling.

getValueUnsigned() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator2ByteUnsigned

Returns the first translation item as unsigned value.

getValueUnsigned() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator4ByteUnsigned

Returns the first translation item as unsigned 32 Bit value.

getValueUnsigned() - Method in class tuwien.auto.calimero.dptxlator.DPTXlator8BitUnsigned

Returns the first translation item, the value scaled conforming to the range of the set DPT.

getVersion() - Method in class tuwien.auto.calimero.knxnetip.servicetype.KNXnetIPHeader

Returns the KNXnet/IP protocol version of the frame.

getVersion(short) - Method in class tuwien.auto.calimero.knxnetip.util.SuppFamiliesDIB

Returns the version associated to a given supported service family.

getWriteLevel() - Method in class tuwien.auto.calimero.mgmt.Description

Returns the write access level for the property.

getYear() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDate

Returns the year information.

getYear() - Method in class tuwien.auto.calimero.dptxlator.DPTXlatorDateTime

Returns the year information.

GLOBAL_OBJTYPE - Static variable in class tuwien.auto.calimero.mgmt.PropertyClient.PropertyKey

Identifier for a property defined with global object type.

group(FrameEvent) - Method in interface tuwien.auto.calimero.mgmt.TransportListener

Indicates that a KNX group message was received from the KNX network.

GroupAddress - Class in tuwien.auto.calimero

Represents an immutable KNX group address.

GroupAddress(int) - Constructor for class tuwien.auto.calimero.GroupAddress

Creates a KNX group address from a 16 Bit address value.

GroupAddress(int, int, int) - Constructor for class tuwien.auto.calimero.GroupAddress

Creates a KNX group address from the 3-level notation main-, middle- and sub-group.

GroupAddress(int, int) - Constructor for class tuwien.auto.calimero.GroupAddress

Creates a KNX group address from the 2-level notation main- and sub-group.

GroupAddress(byte[]) - Constructor for class tuwien.auto.calimero.GroupAddress

Creates a KNX group address from a byte array value.

GroupAddress(String) - Constructor for class tuwien.auto.calimero.GroupAddress

Creates a KNX group address from a string address representation.

GroupAddress(XMLReader) - Constructor for class tuwien.auto.calimero.GroupAddress

Creates a KNX group address from XML input.

groupReadRequest(ProcessEvent) - Method in class tuwien.auto.calimero.process.ProcessListenerEx

Indicates that a KNX group read request message was received from the KNX network.

groupReadResponse(ProcessEvent) - Method in class tuwien.auto.calimero.process.ProcessListenerEx

Indicates that a KNX group read response message was received from the KNX network.

groupWrite(ProcessEvent) - Method in interface tuwien.auto.calimero.process.ProcessListener

Indicates that a KNX group write message indication was received from the KNX network.